Carpet Loom / Plush Loom

Reed space

Any Width

Reed type

Fix

Type hand side

Right

Frame

The complete frame of loom is fitted with the dowel pin at different joints of binders, crank bushes and tappet bushes in order to facilitate foolproof align-meant while erection of the loom.

Crank shaft

50mm machine forged and grinded edges provided with self-lubricating bushes. Extra middle support provided for rigidity over 80, reed space loom

Crank arm

Made from cast iron and fitted with gunmetal / self lubricated bushes and rain forced by steel strapping

Tappet shaft

Superior quality tested I.S. standard bright bar moving on self lubricated bushes fitted brackets.

Gears

Hob-cut helical gears to give smooth and noise-less working & uniform quality of fabrics.

Picking

Under picking system with chilled picking nose and picking bowl perfectly matched and made up of special quality metal to give longer life.

Shuttle Box

Plain 1 x 1 or 1 x 4 (Mechanical)

Shedding

Tappet / Dobby / Jacquard

Beating

Slay is carefully made from selected good quality of seasoned teak wood with shisham wood race board fitted with polished slay cap is incorporated in the loom which ensures stable flight of the shuttle and correct beating.

Cutting

Face to Face By H.S.S. blade

Railing

Made of special graded casting and surfaced on Plainomiller for fault free and smooth cutting.

Plate form & top

Made from special graded casting and surface on Plainomiller for giving better support and smooth running of fabric while cutting.

Take up

Positive & continues Take UP, upper and lower cloth are separately taken up by two needle rollers.

Let off

Two ground warp beam operated with positive let-off & one warp beam for pile having uniform let off with the desired proportional length of pile is achieved with worm.

Beam attachment

Three beam attachment

On request

Push button operating system, Electronic Dobby, Warp & Weft Stop Motion Etc.