Hydro Extractor

Product Description

Hydro Extractor

Revolving Cage

The perforated basket is made of stainless steel in standard sizes and in different gauges according to size of the machine. It consists of top flange made of stainless steel sheet and bottom flanges of heavy cats iron plate lined with stainless steel sheet and are dynamically balanced. The outer cage side wall is also made of stainless steel sheet according to size of the machine.

Suspension

The whole unit is supported on three C.I suspension columns which are heavy to avoid vibrations. The steel pins with spring and special bushes are mounted with suspension columns. The whole arrangement is made to remove the vibration while the machine is running.

Drive

The revolving cage is driven by electric motor fixed on a support on the side of cast iron base. Electric motor is fitted with special dead load proof clutch pulley with brake lining arranged for the progressive starting of the unit. The drive from the motor to the center pulley is through V-belts.

Brake

The brake is controlled by hand lever with ferodo Lined Liner.

Lubrications

Lubrication is dealt with by grease gun, through the main shaft provided with a small bolt on brass nut to reach the bearing housing.

Safety Cover

The machine is supplied with solid aluminum cover interlocked with it. The machine cannot be started unless the cover is closed; the cover cannot be opened until the machine is stopped.

General Description

This is very sturdy machine for treatment of heavy loads of cotton, woolen, hosiery, chemical Industries and big laundries. Water is drained out by centrifugal force. Imported taper and roller bearings of heavy duty capable of withstanding heavy loads are used in the machine.

Description